ec safety data sheet according to directive 1907/2006 p age : 1 ( 3 ) trade name : solder - wire ks 1 15 flowtin ? t s c date of issue: 15.12.2005 revised on: 24.05.2011 date of print: 08.11.2011 1. name of product, characterization and company name information on the product trade name: solder - wire ks 1 15 flowtin ? t s c usage of the product / preparation solder wire for soft soldering identification of the manufacturer / supplier address: multicomp premier farnell plc 150 armley road leeds ls12 2qq phone: +44 (0) 870 129 8608 fax: emergency call: +44 (0) 8 70 202 530 (during office hours only) e - mail: 2. possible hazards: not a composition for the purposes of the dangerous substances regulations, but nevertheless observe items 4 - 16 3. composition/information on the components chemical characterization: tin - c opper - silver alloy (with <0,1 % other iron - metals) with flux max. 3,5 % modified r e sin ( halide - acti vated) composition according to ec 1907/2006: contents cas no. einecs no. symbols r - phrases: substance remainder 7440 - 31 - 5 231 - 141 - 8 tin 0,6 - 0,8% 7440 - 50 - 8 231 - 159 - 6 copper 3,6 - 4,0% 7440 - 22 - 4 231 - 131 - 3 silver <3,5% modified r e sin the wor ding of the r - phrases stated is indicated in section 16 4. first aid measures general information: if casualty is unconscious but breathing, place in the recovery position. if breathing has stopped apply artificial resuscitation or give oxygen by mask after inhalation: remove patient to fresh air. if irritation resists, obtain medical attention. after skin contact: if any skin irritation develops seek medical attention after eye contact: flush immediately with plenty of water. in cases where spitting flux has entered the eye seek medical attention. after ingestion: rinse mouth immediately and drink plenty of water. seek medical advice. hints for doctors. i nhalation of the flux fumes given off at soldering temperatures will irritate the nose, throat and respiratory system. repeated or prolonged exposure to flux fumes may cause shortness of breath and cough. . physician's information treatment: decontamination, treatment of symptoms. 5. fire fighting measures suitable extinguishing media: use ext inguishing media appropriate to surrounding fire con ditions special protective equipment for fire fighting wear self - contained breathing apparatus and protective clothing to prevent contact with skin and eyes. 6. accidental release measures p ick up and place in appropriate container 7. handling and storage the fumes produced during soldering should be extracted away from the breathing zone of the operators. ensure the area is wel l ventilated. wash hands with soap and warm water after handling, particularly before eating, drinking or smoking. the product s hould be stored in a cool, dry area.
ec safety data sheet according to directive 1907/2006 p age : 2 ( 3 ) trade name : solder - wire ks 1 15 flowtin ? t s c date of issue: 15.12.2005 revised on: 24.05.2011 date of print: 08.11.2011 8. exposure controls and personal protection additional information on system design : local exhaust or dilution ventilation a nd control of process conditions are suitable methods.. substances with limit values to be monitored at the working place : danger to health at the working place : peak limit category: working place limit values according to trgs 900 from section 2 for g ermany: product name cas no. ml/m3 (ppm) mg/m3 type tin 7440 - 31 - 5 2 mak (nl) copper 7440 - 50 - 8 1 mak (dfg) silber 7440 - 22 - 4 0,1 mak (dfg) skin resorption / sensitization: skin resorption ---- sensitization: ----- h sensibilisierung: kategorie bemerkungen general protection and hygiene measures avoid direct contact with eyes, the skin and clothing. personal protection respiratory protection: if concentrations are over the exposure limit, use a supplied air r espirator. hand protection: use heat resistant gloves if required. eye protection: operators should wear goggles personal protection: light protective clothing 9. physical and chemical properties form: form: tin - copper solder colour: silver me lting point: 2 17 c vapour pressure: n.a. density(20c): 7 - 8 g/cm3 10. stability and reactivity reaction with substances: possible with oxidising agents. hazardous combustion or decomposition products: none 11. toxicological information the toxico logical classification of the product is based on the results of the calculation procedure of the general preparation directi ve 1999/45/ec. acute effects: none toxic metal . 12. ecological information general information: no effect to environment kn own 13. disposal considerations disposal information product: contact a licensed professional waste disposal service to dispose of this material . further information: observe all federal, state and local environmental regulations. collect metal for r ecycling waste identity number: waste identity number eak - code: 120104 14. transport information ggvs eb /adr the product is not classified as hazardous for transport
ec safety data sheet according to directive 1907/2006 p age : 3 ( 3 ) trade name : solder - wire ks 1 15 flowtin ? t s c date of issue: 15.12.2005 revised on: 24.05.2011 date of print: 08.11.2011 15. legal regulations: labelling information: the product is classified and labelled according to the ec directives. not subject to current legislation water hazard class: wgk 1 (weakly water - endangering) classification according to the ta luft: organic materials class iii ; whole - carbon - concentration: max. acceptable emission50 mg/m^3 (mass - flow - rate >= 0,5 kg/h) ingredients: tin, copper , silver, r e sin 16. further information r - phrases point 3: ------------------------------ n.k.: not known n.a.: not applicable other information this statement is based on our curr ent knowledge and offers no assurance of product properties.
|
